Dialing Tilt forks

[Ellie]

I can't get them dialed for some reason. There's enough room for the wheel to click back and forth and I've already tightened the balls out of the bolts. How do I fix this? My wheel is brand new so it's not ovalized or anything. The fork is brand new too. Washers don't fit.

 

[dpnelson31]

Try washers outside the fork, on the actual bolt.

 

[Mario Rocchio]

Don't try washers, the fork has built in spacers. If you force washers in there, you'll end up bending the fork legs out, and your wheel will more than likely click when riding.

 

[Ronnie Bergan]

It's most likely your bearings dude.

 

[flowridelive]

I don't really know man... I ride a Tilt Fork with 110 Blunt Wheels and reds, and they don't rattle or anything. Sorry.

 

[Jimmy C]

Yeah its probably bearings. I had the same problem and i put new bearings in and they worked fine

 

[Carson .]

Could be your axle if it's a razor axle

 

[Ellie]

I have two pairs of wheels, grippers with reds and sliders with district bearings. all of them rattle in the fork

 

[Broccoli1]

I can't get them dialed for some reason. There's enough room for the wheel to click back and forth and I've already tightened the balls out of the bolts. How do I fix this? My wheel is brand new so it's not ovalized or anything. The fork is brand new too. Washers don't fit.

The stock axle must be a tad too long-

Try an aftermarket Bolt axle

http://Acesneightsscooters.com/HD-Front-Axles-M8HDBFRONT.htm

You might be able to find the Socket Head Bolt at a Local Hardware store also

 

[D ∆ V I D]

yeah i need to go to the hardware store and get a front axle

 

[Robert]

get a grade 8 bolt