District clamp?

[Connorh333]

I ordered it but what do I do so i doesn't strip. 5 of my friends had it and it stripped easy.

 

[tylerbillman]

You use your allen wrench correctly and make sure it's all the way in before you turn the bolt with it, I've had zero problems with mine

 

[Connorh333]

not that kind of strip. i meant they stripped the threads

 

[RockinTheCasbah]

Tighten them down EVENLY , all aluminum clamps will strip if you crank one bolt down while you leave the other lose. Snug both bolts down then slowly tighten them switching bolts after each 1/2 a turn. I have district clamps that are over 2 years old and still working fine