District v2i wheel spacers and axel

E

evanreed

Bronze member
Yes I have been harping about this and I am not even shure if this is the right place to post this but I really need district v2i spacers. Here's my story:

So I bought this district rory Coe v2i from this kid at my local. Everything was there including a switchblade(drilled into the deck). No axel. No spacers. No break. I have a v2 and I tried to put in my v2s break and spacers and when I tried to fit my Jon Reyes wheel in, it wouldn't fit! I later learned by laymay that I can use wheel spacers as district spacers but I don't have any. I will use the switchblade but I realized that's the district break has rubber spacers built into the break. Plus I have no axel.

Where can I buy the spacers, or spacers that's are big enough to fit the rubber break spacers that I don't have, or even where can I buy a rory coe v2i break, axel and spacers? Should I contact district?
Sorry for going in about this but I really would like to ride my scoot and not just look at it without the back wheel. Thanks guys.
 
blackscootdawg

blackscootdawg

Bronze member
did the switchblade brake come with it?
buy district bearings, and just use the spacers from them.
u dont need the black plastic spacers if u run the switchbade brake, and the District bearing spacers
 
B

Broccoli1

Bronze member
blackscootdawg said:
for the axel, go to inward scooters, and get their axel.
link here: http://shop.inward-scooters.com/product.sc?productId=820&categoryId=17

the bearing/spacers i talked about in the last comment can also be bought off of Inward Scooters.
link is here: http://shop.inward-scooters.com/product.sc?productId=679&categoryId=17
Click to expand...

Do as blackscoot says and it will work.

The Rubber on the District brake is not a spacer- it has holes for the spacers which help keep the District brake in place.
 
B

Broccoli1

Bronze member
evanreed said:
No. I need the rubber pieces because it's a switchblade. The kid drilled holes in the deck
Click to expand...

Ok, I'm lost here now.

The District deck only needs the district wheel spacers on the Axle- they are the same thing.

"Lightwieght bearing spacers with built in ring to keep the spacer centered. Comes anodized in black. Will also work as back spacers for a District deck.
Sold Individually."

http://www.nolimitscooters.com/#/es-bearing-spacers/4544204964

same thing

http://www.nolimitscooters.com/#/district-bearing-spacer/4565219129


Rubber Piece: are you talking about the round piece of rubber that comes with the Switch Blade Brake? Just use a piece of inner tube


Post up a photo please

OH- I asked the distributer for District about buying just the brake but they don't sell just the brake.
 
You must log in or register to reply here.
Top