Eye Candy. (do not post your own scooter!)
- Thread starter Mattt.C
- Start date
No bearings = wheels okay
Oh page 400.
Dom Marconi
Silver Member
I totally just realized they fixed the size of the screenprinting on the protos
Robert
Tr0ll
They both showed up today 
And for the people that wanted to know how long the slit was,its about an inch and a half long.
And what I didn't know is that the clamp wasn't welded to the bars, so it comes off.
It also comes with the ethic starnut installed so if you are going to cut it down about 3 inches you will have to hit the starnut down farther.
And for the people that wanted to know how long the slit was,its about an inch and a half long.
And what I didn't know is that the clamp wasn't welded to the bars, so it comes off.
It also comes with the ethic starnut installed so if you are going to cut it down about 3 inches you will have to hit the starnut down farther.
Jacobo
Steel Member
You just went full retard. It's just a normal clamp...
William Juniper
Steel Member
lolwut.
issac p
Silver Member
the clamp isn't attached to the bars at all. its just a normal clamp, so it can slide off.
Grant Schofield
Silver Member
Wow there is hahahhaa you can see it in the picture
CameronSkootz
Bronze member
Post pics of your set up Robert.
Robert
Tr0ll
morgan_bvrns
Steel Member
You just now noticed that? That was like the first thing that stuck out to me.
Caleb H
Member
then why are they saying its got an intergrated clamp?? its just comes with one
Bear Grylls
M3MB3R
hey i took this haha
Caleb H
Member
:like: