Fork compatibility

[Phase Three]

I was wondering what forks would be the best for a full proto scs and are also compatible.

 

[Austin Forkner]

Doesn't matter what fork but tilt forks are probably the best out right now but depends on the deck.

 

[Phase Three]

tilt and phoenix forks aren't long enough

 

[tyler_magro]

i know that proto, lucky, and tsi make forks that have the full 6" forktube

 

[Scoot_scoot_]

Does anyone know what forks fit an ethic lindworm without or with very little spacers in scs?

 

[Marketship]

Does anyone know what forks fit an ethic lindworm without or with very little spacers in scs?

I run a nimbus on a lindworm, and it only takes 2 tiny ass spacers to make it fit nice and comfy with a tilt scs.

 

[Flocka]

tilt and phoenix forks aren't long enough

Which deck are you running?

Does anyone know what forks fit an ethic lindworm without or with very little spacers in scs?

Tilt Legacy forks need about 2mm less spacers than a Nimbus, but steel forks would be your best bet. If you can find some MGP length forks (apex and Legacy forks are 2 I can think of) im pretty sure they will fit without spacers but not 100 percent sure.

 

[Phase Three]

Which deck are you running?

the phase two spotlight deck

 

[Flocka]

the phase two spotlight deck

Oh right. Dont really know much about Phase Two decks. But id say go for Thom cats or something steel as they usually have longer fork tubes.

 

[Phase Three]

are strikers any good?

 

[Flocka]

Yeah as long as you dont use pegs with them.

 

[Phase Three]

Yeah as long as you dont use pegs with them.

wait you can't use pegs with strikers?

 

[Flocka]

wait you can't use pegs with strikers?

Na it bends them a lot easier than without.

 

[Phase Three]

whatever ill still probably get some strikers

 

[tyler_magro]

if you're going to run pegs deff don't use strikers you will regret it. Get some smx's by vertx they are longer than tilt forks and just as strong

 

[Phase Three]

how about epic rg1's? the fork tube is 6.25 in. I don't know on this one because lucky's, proto's, and tsi's, are all 6.5 which is compatible, the tilt's are 6 in which aren't compatible, but the RG1's are 6.25 which is inbetween

 

[Phase Three]

bump

 

[GraysonD!!]

bump

How are u finding strikers

 

[zach poon]

if you're going to run pegs deff don't use strikers you will regret it. Get some smx's by vertx they are longer than tilt forks and just as strong

both smx's suck both snap

 

[Phase Three]

how about epic rg1's? the fork tube is 6.25 in. I don't know on this one because lucky's, proto's, and tsi's, are all 6.5 which is compatible, the tilt's are 6 in which aren't compatible, but the RG1's are 6.25 which is inbetween

can someone answer my ?