fork tube stuck in bars

[copley]

well i snapped my fork and now it is stuck in there and i got angry and hit it in even further any ideas how i could get it out

 

[KNOX LOCAL]

pliers?

 

[jakeishectik]

gt an scs

 

[Zaηe]

worse comes to worse, hit it all the way up.

 

[jordyskoots]

worse comes to worse, hit it all the way up.

yea do that

 

[nitroRCs]

Im guessing your bars have slits?

I had the same problem.... You cut a line up the slit and put it out.

 

[Rob.]

that ^ cut up through the fork and then use pliers

 

[mattttyler]

this happend to me to but how would cutting it help at all?

 

[Rob.]

if there's room to pinch it then the forktube becomes slightly smaller, making it easier to get out. cutting it puts like a millimeter or so of room in the fork to pinch, making it less snug against the bars.

 

[mattttyler]

ohhh but mine is like in all the way past the slits

sorry im not tryin to like take over this thread or anythin i just needa get this thing out

 

[Justin Vogelsberger]

if its up past the slits i guess just hit it up all the way

 

[michaelpytel]

keep banging the bars on the ground, for liek hours if it takes that lognbut eventualy the vibration will couse it to pop out.

 

[mattttyler]

i switched from ics to scs soooooooooo theres a starnut in the way

 

[DJ Lee]

how?

 

[matr!]

b b b b Bicycle spoke

 

[sc00terJimmy]

next time drill a tiny hole in the fork tube and line it up with the slits, That way it will be easier to get out next time

 

[Hey Mesh]

wen my forks snapped they napped like at the slits and i just bent my slits a little with pliers and banged them on the ground n they fell out but if the bit of fork doesnt rattle or get in the way of ur new forks id leave it or push it all the way up