French ID forks questions....

[matthew]

u get a seaclamp that fits i think 28.6 r something and put it onto your fork tube, to the bottom and tigten a bit so it can move with a little bit of hammering, make sure your fork has no play and hammer that seatclamp down unitill it can go no more and then tigten it all up. Put your bars on so the bottom touches the top of the seatclamp and tighten up your bar clamp. or just get a sr compression system lol

 

[Domsicle]

The inner part of the fork is machined to take a bmx starnut cap (they come with headsets and look like this http://www.purelycustom.com/c-36-headset-caps-screws.aspx ) and if you didn't have one you could prob rig up a washer and Im pretty sure it'll use a sr compression bolt but Im not positive on that one

 

[marcel]

Jimmy Dean, I have FID compression systems overhere, just contact me

 

[georgGartlehner]

whatttttt do u have compression systems

 

[JonnyJonDogg]

lol that sounded funny ^^^

 

[demo]

whatttttttttttttttttttttttttttt???????????

 

[kyle199]

would u be able to just buy a star nut from a bike shop and a compression bolt that is longer than the forks and use the top cap of a headset for the botom of the forks

 

[Humma]

how can u do it though without the little plate at the bottom of the fork?

I don't think you need that.

 

[Cody Appelhans]

hahahaha lol

 

[demo]

would u be able to just buy a star nut from a bike shop and a compression bolt that is longer than the forks and use the top cap of a headset for the botom of the forks

sr comp.

and the bottm is round so u cant do the top cap thighie B)