Fuck my life!

[iScoot2.0]

step 1. put forks in a vice
step 2. put your locknut on and TRY as hard as you can to try and rethread it by using
a vice grip and just twisting it on.
step 3. see if it works

 

[TomK]

Cut of the top three threads, then file the fork straight at the top and you should be good to go.

 

[Thom Cat]

My advice go to Ace Hardware store and buy a thread file. they are small with a sharp edge made for filing threads. they cost about $8

 

[BrandonWeir]

This is why we put a block of wood on top of things that we're hammering. Try just jamming a locknut on there. I've had the same problem before so I basically rethreaded it with the locknut and a torque wrench.

 

[Joey Wallace]

This is why we put a block of wood on top of things that we're hammering. Try just jamming a locknut on there. I've had the same problem before so I basically rethreaded it with the locknut and a torque wrench.

yeah im getting my 30 pound vice out of storage today and im usin my channel locks to try and get a locknut on there lol

 

[BrandonWeir]

There you go lol.

 

[Joey Wallace]

haha i just cut off the top of the fork and it screwed on fine and now my scooter is dialed as hell

 

[BrandonWeir]

Beaaaaast mode.

 

[mattyts]

cut the top 3 or 4 threads off

 

[BrandonWeir]

Yeah I think he's got it solved now.

 

[Kieran Mayhew]

Okay then.