Grinding on rollouts?

[Stantheman]

when i do my 180s or anything that i come out fakie in, i can ride them for a while, but when I try to rollout out, my bottom plate grinds. It happen so much, that ive stopped doing them. What i do is I lean to the right, and try to pull to the left. Im also riding an old A headtube, on a proB, is that whats causing my problem?

 

[gil_]

are u scraping the sides of the deck or bottom? well if its the sides then ur leaning way to far to the side and if ur scraping the bottom then somethings wrong with ur deck

 

[ely]

yeah try useing a differnet scoot and see if u have the same prob.

 

[Steezeman]

It's not the scooter, my friend could do sliders on his scoot when it had like a centimeter of clearance. You're probably just leaning too far to the side, keep practicing and you'll get them.

 

[Stantheman]

i fixed the problem
i did a little reading and found out that if you put an A headtube on a proB, it will lower the front alot
i changed tubes, and now its all good :-D

 

[Hep Greg]

that's probably not the problem. i ride an Old A headtube on a Pro deck, and i have grindrails on the bottom of my deck, and i never touch the ground on sliders or rollouts.