griptape

[razorfanatik54]

how do i change it/ put it on?

 

[mbillick1993]

use a hairdryer and a razor blade to take the grip off, start to peal enough that you can hold it in your finger, then use the hairdryer to get the grip warmed up and peal it all off

then make a stencle of the deck with cardboard, trace the grip tape and cut, peal it off stick it on.
put some weight on it for about an hour. then off to ride it (dont get WATER or DIRT on it) and your all set.

 

[team_punishment]

use a hairdryer and a razor blade to take the grip off, start to peal enough that you can hold it in your finger, then use the hairdryer to get the grip warmed up and peal it all off

then make a stencle of the deck with cardboard, trace the grip tape and cut, peal it off stick it on.
put some weight on it for about an hour. then off to ride it (dont get WATER or DIRT on it) and your all set.

you dont need to do all of that, just use a razor or a screw driver to peel it up. then just use your hands to peel it back. and when putting on your grip, just take your break and your wheel off, and put a little extra grip tape on(too long and wide) and just use a razor to trim the extra off the edges

 

[Tylerr.]

i jjust peel it.
first thing i did when i got my pro yesterday.
=]]

putting it on is a bitch though.

 

[Hep Greg]

GRIP N' RIPPP

 

[Kevin11]

Wow, It's really not that difficult, it takes common sence and knowledge which you seem to be lacking if you cannot replace griptape lol..

 

[D= its sam!!]

see what you do, is you get a flamethrower...

OR

u just peal the grip tape off, use it as a template to cut ur new griptape n sick it on the deck lol

 

[razorfanatik54]

Wow, It's really not that difficult, it takes common sence and knowledge which you seem to be lacking if you cannot replace griptape lol..

ive never done it before. i just have stock griptape.

 

[gerkin of honour]

you grab it and you pull up hen you put the new grip tape on

 

[matthewcarbotti]

GRIP N' RIPPP

and add the part about cutting it and shit. but other than that, what greg said. pretty simple.

 

[zprestoe]

peel it of then just cut off the shapes like brake, folding mech
and lay it down =]
file edges so u can see outline,
then razor blade it