half knuck problem

[Nick Griffin <3]

this has happened to me with both my half knucks, ive snapped legit five bolts in this and the last like 6 threads on the top hole are stripped, and i have half a bolt stuck in there, and i need it out, and dont say "drill it out" unless your going to explain how to do that, please help.

 

[JUSTDOWORK]

take a 6 metric drill bit with a drill and drill through the hole that has the stripped bolt in it

 

[Nick Griffin <3]

will it still be threaded?

 

[tylerbillman]

Probably not.... I say screw the threaded and drill it out like explained above, then...

...thread a new bolt in backwards and screw a nut onto the other side!
Then do the same thing with the bottom.

 

[Nick Griffin <3]

i dont like that idea http://cristgaming.com/pirate.swf

 

[Ride By]

Take Half Knuckle to Machine shop, ask the to remove the bolts, drill it out, tap a new thread, and replace with larger bolts.

 

[Jesse Alexander]

I just saw the bolt through the middle of the clamp where the opening is and once its sawed in half use needle nose plyers and rotate the 2 pieces of the bolt out it workd for me every time