Headset Question

[Billy Coles]

i neef to get a new headset for my scooter cause my current ones gay.
I use stock razor pro forks, how do i remove the forks and the headset?
With the headset. do i need a threaded 1 1/8th bmx headset, cause im using threaded forks.
How do i install the headset and put te forks back in?

Sorry for all the questions, im the worlds biggest noob.
Dont tell me to ue the search feature, i already did, and nothing that help me came up.

Thanks
Billy

 

[Scooter Mcgee]

bash the headset out
then put the new one in.
threadless will work with threaded scooter forx

 

[Tom Affleck]

yes it does, every way inside, and the man will go

 

[christian mesa]

i got a sealed one today. fsa. first of all band the bottom and top cup out. then u get a vice, two pieces of wood, ur bmx headset . ok.. u can do this one cup at a time or both.. i did it 1 at a time. ok get the wood and put on the threaded cup,, when its sitting on where it goes into.. tighten the vice up until its all the way in.. cant be difficult. then do the same with the second cup and use the wood for both cups, this is to protect it from any damage. install the bearings. then put the top stock headset bolt on to of the headset, (single one)
screw it onto the forks. then add bars and tighten clamp and your good to go.. hope it helps i couldnt be bothered going into too much detail...

 

[Billy Coles]

thanks for all this, but how do you remove your forks?

 

[Joe Riley]

loosen your clamp. you can either unscrew your bars, or yank them off like i do. then unscrew the 2 pieces of metal crap and THEN you can take out the fork.