help with compression

[Jb12199]

Ok so i have district fork and district alu bars is there a way to run any other form of compression other than ics please show a pic of how it works

 

[Noah Fraley]

scs

 

[Stackies]

Cut that top part off on the fork , and you can run any compression.

 

[Jb12199]

eh dont want to screw around with cutting it but i remember seeing a thread about this but i couldnt find it when i searched

 

[Rob.]

cut the top part off, best way dude

 

[Jb12199]

k i might just lookin for some other ways that would work

 

[iScoot2.0]

instead of cutting maybe try spacers?

 

[Devin Parker]

Cut that top part off on the fork , and you can run any compression.

except hic

 

[Jb12199]

instead of cutting maybe try spacers?

It has an itagrated top cap

 

[Hunter Treviranus]

except hic

no u can run HIC cause his bars are oversized and u just have to cut the built on top cap off

 

[Jb12199]

I have the alu bars so the Inner diameter is standard sized but the outside diameter is over sized

 

[Devin Parker]

I have the alu bars so the Inner diameter is standard sized but the outside diameter is over sized

yeah they are aluminum so they have to make it at least a 120 wall.

 

[Creative]

just get an scs. and cut off the top thing.

 

[dpnelson31]

Bad idea to cut the fork. It's designed that way for a reason. Buy a new fork without the topcap.

 

[parrish]

no, thats soooo wrong, there is a way to do it, buy an SCS, put it on then put you ICS on, now the bolt will be sticking out of the scs, put the topcap on, now take the starnut and grab it wif a pair of pliers and tighten the scs bolt
bam, your done

 

[BenJelinek]

Bad idea to cut the fork. It's designed that way for a reason. Buy a new fork without the topcap.

dude dont post stuff you dont know about. its actually right to cut the integrated starnut off

 

[parrish]

you mean top cap?
lulz