Help!

[Isiahloya]

When i push forward and back on my bars i can hear a creaking noise coming from around my headset. What can i do to fix this. The headset is a week old

 

[Connorh333]

What headset? It could just be a little loose.

 

[Isiahloya]

Fsa Orbit Mx. Hic is as tight. the more tight my hic is the more it creeks

 

[Connorh333]

You have to grease the bearings and inside the cups. use a pin and take off the bearing seal and try to rub some grease inside of the bearing. Also this will sound dumb but put grease on the outside of the bearing and in the cups.
***Remember to put the seals back on!***

 

[Chris36]

make sure you pack the grease in good dont just rub it around a little bit that doesnt do much

 

[Robert]

tighten your headset

 

[salad]

tighten the hic and put wd 40 on it

 

[William Juniper]

tighten the hic and put wd 40 on it

WD40 attracts dirt...... Which causes bearings to slow down or bearings can be shot