home made peggs..

[Bear Grylls]

i made some.

 

[jimvandeveld]

Alrite I'm working on making my own. If found a bolt in my dad's toolbox and it's just like a normal one but it has like a washer attached to the top. Like imagine a washer welded just under the top like octagonal turning this (idk I'm not tool savvy). So I had some pvc lying around and thought huh how can I make a plastic peg out of this? So then I realized the diameter of the pipe and the washer thing are the same so it's totally flush! So I used a TON of like glue on it. Like a good solid coat of elmers and then super glue and epoxy on it and I filled in the hollow center of the pipe with glue. But I don't think it's gonna hold under my weight... Any ideas on what I can do?

don't use pvc and elmers glue...disaster in the making. You need a hard polymer plastic, with a thick wall. Pvc will never ever work

 

[Anthσny]

i made some.

pics

 

[dubwhip2baruntwist]

hey I can tell u str8t up the best pegs u can make r outta of a metal socket set from harbour freight or used tools store, just pick the size socket you want get a bolt that will fit & a nut that fits snug on your sock & u can turn the socket & put it on w/ out a wrench
but put a acorn nut on the end of it 2...

u can buy the bolt @ & nut set ace hardware
& the socket from any used tools store try that.

 

[Joe Collins]

Just get plegs of SZ

 

[Creative]

hey I can tell u str8t up the best pegs u can make r outta of a metal socket set from harbour freight or used tools store, just pick the size socket you want get a bolt that will fit & a nut that fits snug on your sock & u can turn the socket & put it on w/ out a wrench
but put a acorn nut on the end of it 2...

u can buy the bolt @ & nut set ace hardware
& the socket from any used tools store try that.

get a nut that fits snug on your sock you say?

 

[Scooterhero1]

they are delrin

 

[Caleb Hill]

ive seen people make front pegs with back axles with bearings on the end