How do i install brass knuckles?

[proto123]

How do i install brass knuckles?

 

[dezbert]

C'mon your name is proto123....you should know this.

You put a starnut in your forks, cut your bars 2 inches. Put the SCS on your fork, screw the bolt into your forks, put your bars on. Tighten the bolts. BAM.

 

[Michael Rankin]

search for the tutorial video on youtube

 

[Ian Marshall]

Put the starnut in your threadless forks.
Make sure you have bars 2 inches shorter than your normal size without slits, SCS adds 2 inches
Put the brass knuckle on your forks that are already on your scooter, and put the bolt through the little hole on the middle piece of the SCS
Screw the bolt till it's tight
Put your bars in
Line it all up
Tighten the outside clamp bolts
Ta-Dah
I only went into so much detail because I had a hard time too and I know this will help

 

[ScootMasterAndrew]

Not to Be a Dickk or anything, but this isn't rocket science...

 

[swiftsbasher]

Andrew did a video on how to install them http://vimeo.com/3219994

 

[TristanScoots]

Andrew did a video on how to install them http://vimeo.com/3219994

Yea what he said ^^^