how to cut a district v2i?

[Cameron Poe]

not really sure how to do this, if anyone does please let me know. thanks! post it uppp

 

[issac p]

do you actually have a v2i?

 

[Anthσny]

Toothbrush.

 

[issac p]

anthony you're stupid

 

[Anthσny]

Well if you aren't disabled it is quite obvious you cut it with a saw.

 

[issac p]

i think he knows he can cut it with a saw.
he wants to know how he should cut it

 

[Anthσny]

With both hands.

 

[issac p]

you annoy me

 

[Anthσny]

I love you too.

 

[gjdadj]

i'd get it laser cut or milled. its expensive but neat and totally worth it.

 

[Jason]

Anthony, dont be gay.

Cameron, there's a thread already posted about this with actual replies, give it a suss.

 

[Cameron Poe]

okay i coudlnt find the thread. and no shit a saw! i didnt know if you had to re drill the dropouts and all that.. thanks

 

[Chris Vincent]

Just cut it and drill new holes. You dont need to mod the deck anymore, there is enough room to drill holes for the axle.

 

[issac p]

i'd get it laser cut or milled. its expensive but neat and totally worth it.

this is probably your best bet.
but dont be one of those kids that wants to cut down his v2i before he has even ridden one just because they heard they are long. just ride on it for a while then if you still feel it is too big, cut it. just saying

 

[tylerbillman]

use a chainsaw, forreal


no seriously though, draw a line across both sides of the deck that's parallel with the back of the dropouts and is also however deep you want to cut the deck (say you want to cut off one inch, two inches, etc.)
then take a saw to that shittt

then, take your brake out and cut the slot the brake fits in back about the same amount that you cut off of the back and then take a drill with a bit that's the same width as your wheel axle and drill new wheel holes then put everything back together.

you should probably not cut it if you don't know exactly what you're doing.