issac p
Silver Member
i am selling a pretty worn down scooter
the specs are:
-rup deck-slightly cracked on both sides of the gusset welds. i dont think they will ever lead the deck to snapping though. the dropouts on bottom are concaved from me grinding so much.
-rup bars-20 high by 17.5 wide. these bars were the lo bars, so i welded extra metal from bmx bars onto the sides. you can barely notice it, and it works great. the bottom of the downtube is pretty bent and the slits are pretty cracked. still rideable though.(but if you are legit you will probably snap them in like an hour.)
-rup fork- kinda bent. the front wheel sometimes rubs the side of the forks. but if you bend it back it should be fine.
-rup clamp-stripped allen heads, but i ghetto'd it together just so it could somewhat work.
-odi's and odyssey par ends-still in good condition. grips are nor worn down at all
-fsa pig pro headset- still in good condition
-demon cores- worn all the way down to about 88mm. only like one small chunk per wheel. nothing serious
-magray flexy- still in good condition
-magray pegs- very worn down. the front one is worn down all the way threw and the back on is cut to 1.5"
this scooter runs locknut compression. and the bars also go crooked from time to time because the slits need to be wider
i want this thing gone! i want to sell this thing for about 90 shipped
I AM PARTING. OFFER UP
http://www.flickr.com/photos/68315180@N03/6251987422/in/photostream
http://www.flickr.com/photos/68315180@N03/6251987662/in/photostream/
http://www.flickr.com/photos/68315180@N03/6251460367/in/photostream/
http://www.flickr.com/photos/68315180@N03/6251988132/in/photostream/
http://www.flickr.com/photos/68315180@N03/6251460879/in/photostream/
the specs are:
-rup deck-slightly cracked on both sides of the gusset welds. i dont think they will ever lead the deck to snapping though. the dropouts on bottom are concaved from me grinding so much.
-rup bars-20 high by 17.5 wide. these bars were the lo bars, so i welded extra metal from bmx bars onto the sides. you can barely notice it, and it works great. the bottom of the downtube is pretty bent and the slits are pretty cracked. still rideable though.(but if you are legit you will probably snap them in like an hour.)
-rup fork- kinda bent. the front wheel sometimes rubs the side of the forks. but if you bend it back it should be fine.
-rup clamp-stripped allen heads, but i ghetto'd it together just so it could somewhat work.
-odi's and odyssey par ends-still in good condition. grips are nor worn down at all
-fsa pig pro headset- still in good condition
-demon cores- worn all the way down to about 88mm. only like one small chunk per wheel. nothing serious
-magray flexy- still in good condition
-magray pegs- very worn down. the front one is worn down all the way threw and the back on is cut to 1.5"
this scooter runs locknut compression. and the bars also go crooked from time to time because the slits need to be wider
i want this thing gone! i want to sell this thing for about 90 shipped
I AM PARTING. OFFER UP
http://www.flickr.com/photos/68315180@N03/6251987422/in/photostream
http://www.flickr.com/photos/68315180@N03/6251987662/in/photostream/
http://www.flickr.com/photos/68315180@N03/6251460367/in/photostream/
http://www.flickr.com/photos/68315180@N03/6251988132/in/photostream/
http://www.flickr.com/photos/68315180@N03/6251460879/in/photostream/