im sure this has at least happened once

[Ryan Murray]

what do u do if u have a dub clamp and one of the bolts is stripped

 

[maxlikesscooters]

welllll...get a new one......

 

[qwxor]

that happened to greg. he took it out and then drilled a hole for a front axle and you just tighten that and it works excellently

 

[Hep Greg]

take the bolt out, drill the holes out with a 5/16" drill bit, and stick a front axle through it.

 

[Jack;]

or find a single clamp and take the bolt from it...most of them are usually the same threads...all razor ones are i think

 

[scooters]

i had a triple clamp and mine stripped ... i had to hack saw the bolt off it was gay

 

[Ryan Murray]

ya like the head of the bolt is strippped and tight so i cant turn it

 

[rapkid]

heat it up alote and unsrcew it

 

[cliphead72]

take it to the hardware store u can get like a pack or 6 for like 2 bucks

 

[Brian Boston]

]
ya like the head of the bolt is strippped and tight so i cant turn it

Well if you can't get the clamp off your bars, hacksaw the bolt so you can take it off the bars... than get a new clamp

 

[jake ferraro]

if its to tight make sure theres nothing to the side of you.
i did that to a bolt before and it was extremely tight and
when i finally got through it it shot to the sides.


just a heads up.