Inward Bar's Problem Please Help!!!!!!

[AndrewASDF]

I have some Inward bars that are real beatup and one day I decided to take my inwards off my A deck and put them on my pro I had found brand new. And I had a real problem putting them it was rubbing on the threads on my fork. I got many people to help me take them off and it wont work. Any way to resolve this delema please reply.

 

[Andy Mickey]

aftermarket bars aren't oversized at the bottom like shitty razor bars. so its kind of hard to put them on and take them on. after a while the threads on your fork will wear down and it'll be much easier.

 

[Mark Abramsky]

just spin them on

 

[Chandla]

is it bent?

 

[AndrewASDF]

@Chandla: no
@Mark: Tried doesnt work

 

[AidanLynch]

get stronger and take em off =]

 

[matr!]

^^^lol.
My number one solution is go get some weights. Not so you can bang them off, but so you can get tanked and rip them things off.

 

[stukwon-do]

What i do is either put the fork in a vice and twist the bars off. or just hold the scooter by the bars about a foot off the ground and then stomp on the deck. May take a few attempts but be carefull to stomp fairly straight and square so not to put stress on the forks or bars in ways they dont wanna go!

 

[matr!]

you could take your clamps and compression off and try a massive bunny-hop tuck... Has the potential for disaster though