Just checking if these dimension are correct

[bailey]

please tell me if these are wrong diamters and stuff 16 wide 20 high bars

 

[jonnyq]

i like that desighn but idk

 

[bailey]

ya the design is gonna be pretty awesome but if you have one piece pars measure the diameter of them please it will help me alot

 

[Dom Marconi]

umm all of those are wrong.
the id for the steertube must be about 1.125
the crossbar should be od .875

 

[bailey]

huh rephrase that thats confusing

 

[Andy Rhode]

the id for the bar that goes up and down should be 1.125 and the od for that should be a little bit bigger than 1.25

and the od for the bar that is horizontal is .875

 

[scooterperu]

all ur sizes are wrong

CROSSBAR
-OD -> 7/8''

STEER TUBE
-ID -> 1 1/8''
-OD -> 1 1/4'' (aprox.)

 

[bailey]

Hey thanks but i can't find OD1.25'' with ID1.125'' im wondering if this pipe will work http://www.onlinemetals.com/merchant.cfm?pid=7341&step=4&showunits=inches&id=250&top_cat=0

 

[codyferner]

]
all ur sizes are wrong

CROSSBAR
-OD -> 7/8''

STEER TUBE
-ID -> 1 1/8''
-OD -> 1 1/4'' (aprox.)

thats all the same thing just metric

 

[bailey]

huh those are in inches not metric

 

[codyferner]

oh yeah duh, im stupid
carry on