lucky nw bars with the HIC on the lucky nw forks....PROBLEM

[lax0307]

no matter how hard i tighten it, there is still wobble in the headset and i dont know how to fic that. i am pretty sure i have all of the necessary parts to the headset kuz i have been using it for quite some time now with no problems and now it starts to wobble.... can anybody help me figure this out? thanks

 

[nate-O.S.K]

tighten ur compression and get a different clamp it might be stripped

 

[Ryan Kang]

tighten ur compression and get a different clamp it might be stripped

 

[lax0307]

the compression is about as tight as it gets without stripping and my clamp is perfectly fine.

 

[JackDillon]

fork tube could be too long so the compression might not work properly?

 

[lax0307]

naw i think i am missing a bottom cap thing for my headset or something. i took it apart and re installed it prolly 5 times today after i got it at 3:30 trying to fix the miserable issue

 

[Joe Riley]

hic? get a headset spacer.

 

[JohanGrunwald]

I lost my cone without knowing it. That's the shim that makes your headset unshakie

 

[lax0307]

ok so i figured it out. there are these little metal bearing "cups" if you will on the bottom of stock razor forks and so i tapped it off of one of my old razor forks and put it right onto my lucky fork and it took a little to get it to stretch onto the one on the bottom of the lucky fork (which doesnt have rounded edged and i think thats what the problem was) and now it is perfectly snug. thats all ya gotta to

 

[nate-O.S.K]

wait wait wait....what headset you using??stock??

 

[lax0307]

cane creek