MGP questions.

[Richey Muniz]

Okay, if you have a MGP deck and inward threaded forks can you still have a razor threaded headset, or are the threads to high to put the threaded headset on. and if i order inward bars will i have to get them an inch hight that i usually would? because of the headtube?

 

[Derek Seay]

yes, but your gonna need a 1 inch spacer in between the 2 locknuts

 

[Kieran Mayhew]

Why don't you make an effort and get a threadless fork and cut it down. It will look so much better.

 

[Jacob Mahon]

thats if u have the old mgp... if u have the new 1 its only like half an intch if that not sure..

 

[Rob.]

you should be ok with the new mgp. if not you really should consider a threadless headset, because if the threads end above the headset, you can't use the threaded headset

 

[Richey Muniz]

How do i cut down a threadless fork and how much do i cut it?

 

[Rob.]

use a saw or something. i personally use a "Sawzall", because, it saws-all.

but seriously, if the fork is threadLESS you wont have a problem i think..?
measure it out for what you're using..

 

[Richey Muniz]

ohhh thanks so i cut it like half inch because of the ht

 

[IScoot:)]

can ya use blunt SOB threaded forks on mgp stock headset on the forged . not the new one. the old one

 

[Richey Muniz]

okay, i was going to get an mgp, so it would be the new one, so the answers should refer to the new one. just sayin for future reference