Micro Deck Reinforcements

[Matt]

what are the dimensions for box (pirate alex like) reinforcements, but that would fit on a micro

 

[scooterkris]

20mm x 20mm i think. but you have a micro...
measure the side of your deck and how far the part you stand on sticks out from the side.

 

[idk47]

If you can read this weird language then the dimensions are there. http://www.micro-xtreme.com/product_info.php?cPath=33&products_id=96

 

[GoGzS]

25 x 25 x 2 mm ...how long? dunno, measure your deck..but around 50 cm...

 

[Matt]

ian i would buy those but they are like 60 dollars with shipping so i wanted to make them

so i need exact

 

[Hep Greg]

the tubes should be 19.5" long, and its the 1/16" square tubing.

buy the tubing at home depot or lowes. they're kinda of a b!tch to make, mine took a while.

 

[Matt]

everyone says you can get them at home depot or lowes, but at both of my local lowes and home depots dont have the square tubes or aluminum ones to make bars with, only chromoly and galvanized steel

and can i have the exact link to it on online metals if they have it

 

[idk47]

http://www.onlinemetals.com/merchant.cfm?pid=1191&step=4&showunits=inches&id=69&top_cat=60
Make sure you get 24 inches and you need (2) 24 inch long tubes.

 

[Matt]

Are you sure that will fit a micro sprite/bullet

 

[scooterperu]

reinforcements for micro are 1inch by 1 inch aluminium square tubes with 0.125 wall. theyre 50cm long (idk how many inches is it)

 

[Matt]

but is the link ian gave accurate

 

[scooterperu]

nope, its this what you need http://www.onlinemetals.com/merchant.cfm?pid=1193&step=4&showunits=inches&id=69&top_cat=60

lets talk by aim. my sn is ''scooterperu''