New Scooter Zone HIC Clamp?

[Garrett B]

I've heard there was a new clamp and it has like the shim welded into a sz clamp and that way all you have to do is pop it on and then put your bolt in tighten it and then put you bars in and ur done

Can anyone post pics of this please!!!!!

 

[Jacob2195]

http://www.scooterresource.com/forum/showpost.php?p=1220076&postcount=2146

 

[brody01134]

thats so sick

 

[Joe Collins]

sick

 

[Noah Fraley]

does that mean you can use reg 1 1 fourth bars

 

[Jacob2195]

no, only oversized bars

 

[Hunter Treviranus]

its meant for HIC so if your not going to use HIC its pretty much useless

 

[Brock]

I don't get the point of having the shim attached to the clamp, what difference does it make.

 

[R-Dubya]

I don't get the point of having the shim attached to the clamp, what difference does it make.

because people buy into gimmicks...lol...it really isn't better than regular HIC, if anything it's worse.

 

[Vaughn.H]

ronny come on you should know better...

its better because it attaches like scs. you dont have to put a shim on then your bars with the clamp on. you just slide the clamp over the fork and tighten it on. just like an scs would.

so pretty much.

easy to work with.
allows you too tighten your headset without removing anything else except for your bars.
and its just all around convenient

 

[Devin Parker]

AND THE SHIM DOESN't GET STUCK IN UR BARS!!!! Haha

 

[mason buckley]

where can you get it?

 

[Hunter Treviranus]

SZ store not sold online.............yet

 

[mason buckley]

how much and witch side to you have to tighten?

 

[parrish]

AND THE SHIM DOESN't GET STUCK IN UR BARS!!!! Haha

dude
why would the shim get stuck in the bars?
your shim should never touch your bars unless its bolted to the fork

 

[Hunter Treviranus]

how much and witch side to you have to tighten?

$40 i think,and i tighten it on the left

 

[mason buckley]

i hope they come out soon cause i want one

 

[Dom Marconi]

dude
why would the shim get stuck in the bars?
your shim should never touch your bars unless its bolted to the fork

Exactly.
Not to mention, the clamp won't tighten as evenly as a standard HIC system.
I would rather just have a normal HIC setup; it would stay tighter, and allow for easier straightening of bars.

 

[Devin Parker]

dude
why would the shim get stuck in the bars?
your shim should never touch your bars unless its bolted to the fork

for hic it does for a lot of people

 

[Jon.]

That's because of shitty shims. RAD shims are lipped along with many others so it cant get stuck.