Please help me ics/district/district.

[alec logan]

Okay so I Run HIC. and i just got District Dk2 deck and district v2i bars or whatever. and discovered i cant run HIC on them even though they're oversized....? and i cant run ICS cause im running a phoenix fork. so does this mean i have to either buy a new fork and run ICS, or buy a new fork+scs....? please help.

 

[Carson .]

buy an scs or you have to drill out the phoenix starnut.

 

[alec logan]

do dk2 bars fit in scs?

 

[Grant Schofield]

yes. or what some peeple do i run no comression and just clamp the bars to the fork its not the best idea but it works

 

[alec logan]

do your bars/fork still wiggle?

 

[Michael.]

get a proto scs, problem solved.

 

[CollinDonnelly95]

I have the v2i deck and al1 v3 bars too, theyre aluminum so they have to be thicker, theyre oversized on the outside but standard on the inside, get like a proto full size scs, will work with your setup

 

[issac p]

yeah just get a full size scs

 

[SickDistrictChris]

I have district v2-i deck, phoenix forks, and district v3 bars.. will that set up work with this item: http://www.krypticproscooters.com/products/Proto-SCS-%2d-Black.html
Just curious because i ordered everything already not knowing about the aluminum factor in the v3's causing them to have oversized outside, yet regular size on the inside. They have a starnut already installed in the bars, and a slit cut out for HIC... what should i do?!?!