please help me!

Maz.

Steel Member
any compression will work with any fork as long as the fork has a star nut installed inside it.
 

DaYooper

Member
Yeah. There is a topcap on the top of the forktube that has a screw sized hole in the middle. You use a long allen wrench the tighten the bolt from the bottom of the fork, and the bolt rests against the topcap.
 

ConnorD

Steel Member
any compression will work with any fork as long as the fork has a star nut installed inside it.
you're an idiot. Don't reply to threads if you don't know what they're asking. District is ICS, and is a special ics only compatible with district forks. And theres no starnut in the fork either.
 

Rob.

Admin
Staff member
district ICS is crap.

if you want to use the ics, get a district fork.

It won't work with a striker fork.
 
i live in Europe and i cant find the ics for proto striker forks in the EU:eek:

is there any websites out there who sells the ics for proto striker forks that shipps to Europe?? please answer asap;D
 

ConnorD

Steel Member
If you weld some kind of topcap to the top of the proto striker, you could use the ics from district. not sure how youd manage though, you'd most likely need to weld it from inside
 
K

Kieran Mayhew

Guest
Blazer scs sucks shit. I had one and it sucked so bad i then went and bought a proto
They are exactly the same, you just change the bolts and they are fine.

Proto could in theory sue them because I think the SCS was patented, and Blazer went and made an exact copy.
 
Top