problems with my scooter after a day plz help!

[dylbo]

I got a madd gear team edition yesterday and within the first 5 mins the bars twisted then again for about another 8 times in a day we have made sure every thing is well tightened and as you may know i have the krunk triple stacked clamp and it seems to move every time i air plz reply

 

[Mickey G.]

Are the bolts getting loose? Like when it gets loose, can you tell that the bolts are loose? Or are the bolts still tight? If there loose, get some BLUE loctite. Its a thread locker glue that keeps your bolts from coming loose. Don't get the red because the red is permenant.

 

[dylbo]

Are the bolts getting loose? Like when it gets loose, can you tell that the bolts are loose? Or are the bolts still tight? If there loose, get some BLUE loctite. Its a thread locker glue that keeps your bolts from coming loose. Don't get the red because the red is permenant.

btw my bolts have loctite on and are still tight wen bars twist ?

 

[Realscooters8978]

This is just an idea, my friend did this and it seemed to work but it was on an SCS, get longer bolts and get a nut to put on the end of em to tighten em down. hope it works

 

[Realscooters8978]

and add thread lock (blue)

 

[dylbo]

Ok thx will try tomoz but will that stop collar spinning as well as bars

 

[Victor C.]

do the bars have a slit?

 

[humpurple kushiones]

do the bars have a slit?

if the bars dont fly off with every bunnyhop, they obviously have a slit.

make sure the slit if big enough.

 

[-Mark Kuhna]

Just use the clamp that came with your mgp.

 

[BenJelinek]

K
I know what your doing. You need to loosen your bolts all the way so they wiggle around, and then tighten them just a little bit at a time like top, middle, bottom, top, middle, bottom. The krunk clamp actually works extremely well if you put it on like that. Plus they come with blue locktite on them so you don't need to put any on.