proto scs and fork problem

[darknessanbu]

my scs is stuck on my offset fork and i cant get it off
i got it a little bit out but has anyone had this problem and can tell me how to take it out its sooo annoynig i cant fix my headset that wobbles when i ride

 

[Matt Rittler]

loosen the bolts

 

[CTRider]

Loosen the bolts then stick a flathead in the slit and turn it. That should pry it apart enough to move it.

 

[proscooter46]

maybe loosen the compression bolt?

 

[Rob.]

If you've done all of the above, try putting a flathead under the SCS and hitting the handle with a hammer.
I had to do that with mine the first couple times

 

[darknessanbu]

i took all of my bolts off and i broke a flathead on it and it wont come off

 

[proscooter46]

dang.. maybe post a pic of the problem?

 

[KodyGeiger]

tighten it on your bars and pull up

 

[CTRider]

Sounds like you need something a little stronger to pry it. Anything you can use as a wedge to open the slit up a little without damaging the finish will work. Of if you don't care of it gets a little scraped up just use a stone chisel. I can guarantee that would get it pried far enough apart to remove it.

 

[Ernie Porter AZ]

Put a penny in the slot and screw it in back ward. Thats what i did

 

[Billie Rainbow]

Put a penny in the slot and screw it in back ward. Thats what i did

if that dont work, your shit is fucked up for sure.

 

[jimmyisgay0]

SCS aren't made for inwards because inwards are to thick

 

[Kevin Lo]

Phillip, use that black crowbar looking tool I have. xD

 

[JonMeadows]

I had the same problem but its easy to solve.

Use a flat head screw driver and put it between the two sides of the SCS
(The back, where the bolts are) and pull apart. Then lift up at the same time.
It should be only a 5 min process. It also easier with two people. Good luck!!

 

[Steezeman]

Do what Jon said, but let the SCS twist on its way out. That should help a little.

 

[Tanner!]

loosen bolts and do penny trick...

 

[darknessanbu]

kk thanks jon meadows imma try that

 

[Ben Para]

this doesn't have to do with this problem but i am wondering when using an scs is it like better to have no slit in your bars?

 

[Rob.]

It's REQUIRED you have no slits in your bars, or if you have slits, you should use a broken forktube in the slit.

 

[Tom Cirbee]

"Quarter Trick"