Scooter help plz

[Tanner!]

DSA forks, proto, eagle, or yak scat wheels

 

[koreanjb]

Are YAK Scats actually that bad?
People say they are.. Cheap Metal Cores..

Umm.. For Cheap & O.K wheels - YAK Pros
Don't get low profiles, they suck balls

 

[Lil Steve]

What part of NY are you from?

 

[mat]

you dont need all this. the extra weight of the parts will hold you back and make learning harder. dont get new parts till you start breaking stock parts.

 

[Devon Garcia]

Wheels: http://www.c4scooters.com/
Fork: http://www.dsascooters.com/ or inward zero offset for cheap.

wow thanks a lot for that
do I need threaded or threadless?

um threadless comes with a compression set.
but whatever you want and i doubt you would break the threads becouse im pretty sure their like .120 wall

 

[Jamie N]

get the new protos
and a inward zero offset with brass knuckles

will threadless work with what im getting?
and the brass knuckles are wayyyyy too much considering what im already payin...

id probably recommend french id, 0 offset is a bit weird.
You could get an inverted compression sytem which are a lot cheaper, or threaded bars. Unthreaded is better though.
You will also need a headset if you get unthreaded, i would recommend fsa pi, theyre good and cheap.
But do you really need all these parts??

 

[Jamie N]

get the new protos
and a inward zero offset with brass knuckles

will threadless work with what im getting?
and the brass knuckles are wayyyyy too much considering what im already payin...

id probably recommend french id, 0 offset is a bit weird.
You could get an inverted compression sytem which are a lot cheaper, or threaded bars. Unthreaded is better though.
You will also need a headset if you get unthreaded, i would recommend fsa pi, theyre good and cheap.
But do you really need all these parts??

 

[scootersi5]

mcnutty what part of ny r u from

 

[mcnutty93]

What part of NY are you from?

im in Garrison
if you know where peekskill is im five minutes from there...
Im like a 2 minute walk out of Cortlandt Manor

 

[mcnutty93]

get the new protos
and a inward zero offset with brass knuckles

will threadless work with what im getting?
and the brass knuckles are wayyyyy too much considering what im already payin...

id probably recommend french id, 0 offset is a bit weird.
You could get an inverted compression sytem which are a lot cheaper, or threaded bars. Unthreaded is better though.
You will also need a headset if you get unthreaded, i would recommend fsa pi, theyre good and cheap.
But do you really need all these parts??

see thats the thing i dont rly know what i NEED but i def wanna get a real good scooter cause i want it to last

 

[acscooter5]

just make sure you get good wheels.

 

[pron]

just get inward zero offset forks and yak USA's that would be pretty good

 

[koreanjb]

.. Can you do any tricks?

 

[mcnutty93]

.. Can you do any tricks?

yea whips, 180, 180 whip, 360, no footers, no handers, nothings flat
workin on briflips (almost there, consistently landing 1 foot)

 

[mcnutty93]

can someone please tell me EVERYTHING I need to get
eg: compression systems and whatnot...
I'm about to order razor pro, inward bars, inward 0 offset forksand idk what wheels to get...
so my "shopping list"
1. razor pro
2. inward bars
3. 0 offset fork
4. what wheels?
5. compression system?
6. reinforcements?


thanks for all your help I know that these kinds of threads get annoying
5.