Scooter mods to do at home when bored?

NickGraham.

NickGraham.

Member
Conor Davidson said:
If you want your brake to stop rattling forever:

-Go to your hardware store and get the smallest bolt you can fine that is 3" long. It will probably be 1/4" diameter. Get the strongest material they have it in (usually grade 8 black oxide coated steel). Also, get a nut that goes with it.

-Drill out your brake holes in your deck and brake to 1/4". 1/4" isn't too much bigger than the brake bolt so it shouldn't take long.

-Put everything back together. It will probably be harder than normal because it doesn't bend, but once it's in, you're scooter will be SILENT.

-Drop your scooter repetitively to show off to your friends that it sounds like a basketball.
Click to expand...

Definately gonna try that.
 
J

JGOOD

Member
NickGraham. said:
Conor Davidson said:
If you want your brake to stop rattling forever:

-Go to your hardware store and get the smallest bolt you can fine that is 3" long. It will probably be 1/4" diameter. Get the strongest material they have it in (usually grade 8 black oxide coated steel). Also, get a nut that goes with it.

-Drill out your brake holes in your deck and brake to 1/4". 1/4" isn't too much bigger than the brake bolt so it shouldn't take long.

-Put everything back together. It will probably be harder than normal because it doesn't bend, but once it's in, you're scooter will be SILENT.

-Drop your scooter repetitively to show off to your friends that it sounds like a basketball.
Click to expand...

Definately gonna try that.
Click to expand...

Ya i think i'm going to try this also. My brake is mad annoying my coins keep falling out :/
 
ashz893scootys

ashz893scootys

Member
u could bolt like a brake to ur front fork so u can do like foot jams and it will look like the front of a motor bike lol somone try this
 
F

FITTEAMTRAIL

Member
Jon_Good said:
NickGraham. said:
Conor Davidson said:
If you want your brake to stop rattling forever:

-Go to your hardware store and get the smallest bolt you can fine that is 3" long. It will probably be 1/4" diameter. Get the strongest material they have it in (usually grade 8 black oxide coated steel). Also, get a nut that goes with it.

-Drill out your brake holes in your deck and brake to 1/4". 1/4" isn't too much bigger than the brake bolt so it shouldn't take long.

-Put everything back together. It will probably be harder than normal because it doesn't bend, but once it's in, you're scooter will be SILENT.

-Drop your scooter repetitively to show off to your friends that it sounds like a basketball.
Click to expand...

Definately gonna try that.
Click to expand...

Ya i think i'm going to try this also. My brake is mad annoying my coins keep falling out :/
Click to expand...


Use a bearing. It's so solid.
 
conordavidson

conordavidson

Member
It's only solid until the spring adapts to being stretched out, and you have to put something thicker under there to make it tight. Trust me, using a stronger/bigger bolt solves a LOT of problems. It won't snap, it won't bend, and the brake has no where to wobble. It's also easier to adjust (the normal allen size for the break bolt is tiny).

Trust me, it's worth it.
 
N

nick_is_me1

Member
856 EthanSpence said:
i cut my wrists, then put the blood on my deck, and masterbate to it. then use the jizz to put in my wheel and make a JiZZcore. AND THEN! sell the wheel for $35 because i am cool.


OH WAIT. AND THEN ... crap i forget.
Click to expand...

no dude, just no!
 
Billie Rainbow

Billie Rainbow

Silver Member
ashz893scootys said:
u could bolt like a brake to ur front fork so u can do like foot jams and it will look like the front of a motor bike lol somone try this
Click to expand...
Ive got a better idea..
Just learn how to foot jam
Much easier than doing that^^
They are honestly not that hard to learn
 
You must log in or register to reply here.
Top