Scooter not dialed... help?

[-Sal-]

alright so i tried lubing up my headset and tightening my compression all the way. but no matter what it always moves back and forth after a little bit of riding. could anyone give me a helpful tip? what im running is:
Envy AOSv2, fsa impact, epic 0 offset fork, SCS compression, and proto retros if that could be the case too. (and yes i am running a headset spacer)
Any help would be appreciated, ever since i got the aosv2 it hasnt been dialed.

 

[Griffiths007]

Put a tiny spacer underneath the top cap. I had this. Or just not ise a topcap. Its the top cap rubbing on the top of the deck.

 

[Michael Osterlund]

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^


if that dosent work then it is most likely you have to get a new compression bolt OR a new shim for the scs.

 

[-Sal-]

how can the topcap touch the deck isnt it ontop of the fork?

 

[melvin]

I think he meant the top cap is touching the top of the forktube

 

[-Sal-]

ah i dig it.. so should i use the proto spacer then ontop of my headset top cap?

 

[Griffiths007]

No, I meant put a spacer underneath the dust cover. The dust cover rubs on the headtube.

 

[-Sal-]

ahhh alright dog i dig. if i bought a pack of headset spacers i should just use the smallest one?

 

[Robert Reichley]

just put any spacer on your forktube over the headset, under your scs. problem solved.. or cut your forks a little bit

 

[-Sal-]

i did do that and it still wobbles. people are telling me i need it underneath the dust cover i think.