Scooters-Only-Australia-SOA
- Thread starter SOA
- Start date
JamieBowe
Member
you guys are really fucking pissing me off. All i do is try, and i said it was an alright photo, I didn't say the trick was good, You guys always fucking say everything i do is shit. And James the only things i see you doing better than me is airs. You expect me to be perfect. I'm fucking over it.
Bump & Product review from jason incase u didnt see it in scooter forums
& yes mitch we are going make stickers soon, we use make home made ones but buying sum in soon
also the SOA orange metal cores are like almost out stock so if any one is looking at them would order them now as will be sold out in day or so
However we will be trying get a batch of the SOA protype metal cores 100mm x 24mm versions ones i used & have never broke, they seem to be the strongest design yet from the factory so we might stock sum in few weeks time
i will be annoucing the official team by tomorrow nite sorry again for delay!!!
Jason Elies said:Bolt Kit
Set I have came with 3 bolts. 2 pictured here.
I love the look of these bolts, great colour and they're very tidy. Superior to normal hardware bolts, as you don't have to worry about rounding the heads, or have to deal with pesky spanner sizes. Combined with a set of old bearings, they are the perfect length and require no cutting back. They have a very nice hold on the headtube, mine hasn't shifted or creaked since I've used them.
Great look, easy installation and do their job nicely. I recommend the SOA Bolt Kit.
BMX Pegs
Comes with 2 differerent length bolts, 2 different sized pegs and 2 washers
It was fun trying out the possibilities of these pegs. They are showing no signs of bending after having my weight on them, even with their very light weight. They are a nice length too, not too long and not too short. Their diameter is also a decent size, not that bulky but also not too skinny, my feet could stay on them without any problems. However, they seem to be wearing down on the ends after a week of riding, and they scratch kinda deeply. When done up tightly, the bolts will not come loose. They are nice for stalls and flat tricks. Several other riders have had a go with my scooter, one of them claiming he wanted pegs just like them on his scooter.
Light, strong, easy installation and right size. I recommend these pegs if you are interested in learning peg tricks.
Orange Low Profile 100mm Metal Cores
Firstly, I like the colour. Orange is nice. They aren't a very heavy wheel, and the urethane has a tiny squish to the touch. One nylon bearing cup wouldn't hold the bearing very well, whereas the other would, so whether you get a wheel with 2 decent cups is unfortunately touch-and-go. The bearing spacers included make it easier to install the wheel onto an axle, but I have a suspicion they are slightly too skinny, as the wheel had stopped spinning as I tightened it really hard. These wheels are noticabley skinnier than most other wheels available, but as far as I could tell their performance wasn't decreased. With a good set of bearings these wheels go considerably fast, and provide a smooth ride. After riding them for about 2 weeks in the front and back they are both still holding up, even with the amount of stress I have given them with my riding. The bearing cups have become more ovalised which is disappointing. The urethane is showing no signs of dehubbing as of yet, although each wheel has a few hairline splits around 2-4mm in length, due to riding on roads. The rear wheel hasn't worn down much at all, but it doesn't provide much urethane to wear away over a long period of time.
Light and cheap for a metalcore. A few design flaws. A decent wheel.
& yes mitch we are going make stickers soon, we use make home made ones but buying sum in soon
also the SOA orange metal cores are like almost out stock so if any one is looking at them would order them now as will be sold out in day or so
However we will be trying get a batch of the SOA protype metal cores 100mm x 24mm versions ones i used & have never broke, they seem to be the strongest design yet from the factory so we might stock sum in few weeks time
i will be annoucing the official team by tomorrow nite sorry again for delay!!!
James Scown
Steel Member
Justin, me and jackson gonna need a bolt kit mung
Justin, what is this wheel like honeslty?
http://www.scooters-only.com/index.php?main_page=product_info&products_id=181
http://www.scooters-only.com/index.php?main_page=product_info&products_id=181
Ryan Keong said:
yeah not really to kids lol
but yeah they actualy are sick if you just use it smooth riding no big airs not yeah a extreme freestyle wheel most of our wheels released are stopped making only new metal cores will be released
& yeah james can hook u up set but u need edit SOA team video pritty please
