DrakeHawton
Member
whats the difference, what goes where, and what does what?
sorry if theres a thread like this but please explain.
sorry if theres a thread like this but please explain.
Scs, hic, ics...
- Thread starter DrakeHawton
- Start date
- Status
DrakeHawton
Member
have searched sr, just explain?
DrakeHawton
Member
i DID search key words "different compressions" "how compression works" etc... just because i dont post and dont know everything doesnt mean you cant help.
Devon Garcia
Member
Scs: http://vimeo.com/3219994
Ics: Hold on
HIC: From cory
First I'll show you the version that will go along with our fork. This one works without the use of a star-nut. Our fork has integrated threads in the top of the steer tube.
Note the threads inside the steertube.
Those are pics of the compression system that will come with and work together with the RAD fork. No star nut necessary.
Taking the bars off!
Ta Da!
Un-screw the top cap and pull the compression tube off to take the fork out.
And the screw screws into a star nut.
Ics: Hold on
HIC: From cory
First I'll show you the version that will go along with our fork. This one works without the use of a star-nut. Our fork has integrated threads in the top of the steer tube.
Note the threads inside the steertube.
Those are pics of the compression system that will come with and work together with the RAD fork. No star nut necessary.
Taking the bars off!
Ta Da!
Un-screw the top cap and pull the compression tube off to take the fork out.
And the screw screws into a star nut.
DrakeHawton
Member
thanks
Michael Rankin
Super Moderator
searching works wonders
Kevin Lo
Bronze member
You didnt search hard enough......
SCS - Big clamp that has a side for the fork and a size for the bars. You screw in the top cap that will hang from the scs. You're screwing the top cap into the starnut put into your fork. Then you put your shim on dpending on the size of your bars and cut 2 inches off to have your normal high. No slits or else..... Tighten the 4 bolt sand shred.
ICS - A Bolt that is put into the bottom of your fork, to be screwed into the starnut put into your bars with slits. Then tighten clamp and ride.
HIC - Similar to SCS.... You put a shim on your fork and tighten the top cap onto the starnut in your fork. Then you tighten up your clamp on the bars with slits....
Happy?
SCS - Big clamp that has a side for the fork and a size for the bars. You screw in the top cap that will hang from the scs. You're screwing the top cap into the starnut put into your fork. Then you put your shim on dpending on the size of your bars and cut 2 inches off to have your normal high. No slits or else..... Tighten the 4 bolt sand shred.
ICS - A Bolt that is put into the bottom of your fork, to be screwed into the starnut put into your bars with slits. Then tighten clamp and ride.
HIC - Similar to SCS.... You put a shim on your fork and tighten the top cap onto the starnut in your fork. Then you tighten up your clamp on the bars with slits....
Happy?
DrakeHawton
Member
quite happy. thanks for the warm welcome.
- Status