SCS problem

[Joe Manson]

i dont give if there has already been threads about this.

Right so,

I was trying to take my wee's out my scs, i took the top two bolts right out, pulled my wees and the wouldnt budge, so i stuck the bottom of my fork in the vice and tried twisting them to get them out, they still wont budge.. i then put the bottom of the scs in the vice and tried hammering the bars out with a malet but the still wont budge and my gussets started to crush. i cant do the coin trick coz the bolts start screwing in side ways and the threads fuck up on the bolts and in the scs


help?

 

[saltwater]

Lube lube lube, if theres friction, use lube
no homo

 

[Dom Marconi]

i dont give if there has already been threads about this.

Right so,

I was trying to take my wee's out my scs, i took the top two bolts right out, pulled my wees and the wouldnt budge, so i stuck the bottom of my fork in the vice and tried twisting them to get them out, they still wont budge.. i then put the bottom of the scs in the vice and tried hammering the bars out with a malet but the still wont budge and my gussets started to crush. i cant do the coin trick coz the bolts start screwing in side ways and the threads fuck up on the bolts and in the scs


help?

you at least loosened the bottom ones right?
try taking them out

 

[JonnyJonDogg]

yeh i find i need to loose all 4 bolts to get bars out

 

[Matthew Madera]

loosen all 4 bolts,and try the fix ur bolts for the quarter trick. it will come out in a flash

 

[Rob.]

Loosen all bolts evenly when taking it apart...

 

[zolof]

]
Loosen all bolts evenly when taking it apart...

]
Loosen all bolts evenly when taking it apart...

]
Loosen all bolts evenly when taking it apart...

]
Loosen all bolts evenly when taking it apart...

 

[tylerbillman]

Do you need to tighten all bolts evenly when putting it on too?

 

[scootermcinnis]

no you only need to tighten one of the bolts...

 

[TristanVesely]

Hahahahaha. Come on guys it's pretty common sense.

 

[Madis]

When you put your forks and bars on, tighten all 4 bolts at the same time, evenly.

When you want to uninstall everything, untighten all 4 bolts EVENLY.

If you want to just change your bars, then you still have to untighten all 4 bolts.

 

[DMazz]

yeah i have the same problem. i loosened allll 4 boltsss and it still wont budge rofl could i do the penny trick?

 

[Joe Hilditch]

joe you fukkking idiot loosen all 4 bolts

 

[Madis]

yeah i have the same problem. i loosened allll 4 boltsss and it still wont budge rofl could i do the penny trick?

what bars are you using?

 

[Joe Manson]

^^^ he uses slayers

 

[Joe Manson]

sory un ooble dooble post

i just undid all the bolts, one snapped so that will be a bugger to get out, but as soon as i undid the last two my bars slid right out haaha

 

[tylerbillman]

I mean my botton two bolts wont tighten as much as my top two and when theyre all tightened the same amount my bars move..

 

[DMazz]

^^^ he uses slayers

yeah lol. and i still have the slits but i have a fork tube in it