someone help

[Keenan Still]

aight well i just got some new parts in and i was setting my setup up, and i realized that no matter how tight i tighten my headset, its still loose. i ride a district v2, scorcher forks, fsa dh pro, and a baby scs. i tried using spacers, different bolts, putting tape around my compression ring, everything, nothing works. i dont know what in the fuck is wrong so im coming to you guys out of desperation.

 

[MattSeid]

aight well i just got some new parts in and i was setting my setup up, and i realized that no matter how tight i tighten my headset, its still loose. i ride a district v2, scorcher forks, fsa dh pro, and a baby scs. i tried using spacers, different bolts, putting tape around my compression ring, everything, nothing works. i dont know what in the fuck is wrong so im coming to you guys out of desperation.

lol to the bold, but are you sure you're tightening the locknut not the headset?

 

[Keenan Still]

lol to the bold, but are you sure you're tightening the locknut not the headset?

there is no im running scs, i know what im doing, it just wont work

 

[Chris Vincent]

maybe the starnut in your fork is stripped/broken?

 

[gjdadj]

headset could be dead

 

[Frank T]

check to make sure your starnut isnt coming out of your fork and add more spacers, ive had both these problems before

 

[btyczki21]

Make sure you didn't put anything on upside down by accident. I've done it before haha

 

[evanreed]

Make sure you didn't put anything on upside down by accident. I've done it before haha

Happens all the time to me so check it

 

[yoyoflavored]

Is your headset/head tube/clamp ovalized?

 

[Rob.]

Is the fork going above the lip in the baby SCS?