stop the rattle in my blade brake

[jcas367]

i already searched and i already did the penny under the spring trick and my blade still rattles when i ride. any other suggestions?

 

[Rob.]

MORE PENNIES.

 

[jcas367]

i already tried like 3 but it didnt really do anything

 

[science19]

its just that the brake is to small its 1cm or less off from a pro brake so you gotta deal with it

 

[science19]

MORE PENNIES.

rob you asshole! you rick rolled me... dam you! sorry for double

 

[demo]

a bearing a penny. and a fuck load of hot glue=]

 

[scootbaseball]

Okay I'm gunna give you a step by step tutorial thing on how to do this.
Materials Needed: Flat head screw driver, hot glue gun, spare bearing.
Steps:
1. Take your flat head screw driver and place it under the spring and lift up.
2. Make sure the bearing falls under the spring and is secure. You may need 2 bearings if your spring is stretched too much.
3.Get your glue gun and just surround the whole thing with glue.
That should stop your rattling issue.

 

[Mattt.C]

1. Bend the bent end of youth spring into a "^" shape.
2. Stick a bulldog click under it.
3. Because the spring is bent into the shape of the bulldog clip it wont fall out.

 

[Taylor Feist]

i hot glued my blade and now its awesome and no rattle

 

[JoshToy]

MORE PENNIES.

Lawlz.

That's the source of the problem, obviously the spring is stretched out, so replace it.

 

[saltwater]

Use A razor pro sprng ... problem solved!
Those springs were only meant for blades (and other broands like madd gear, old a's ...).

 

[mitchwashere53]

or put a bearing space inbetween the spring and the deck in the bolt the bearing spacer tightens into the spring to stop it from moving nd rattling

 

[1h@vn0l1f3]

just use two nickles. that is what i did and it works good