The "This or That" thread!

Choop13

Choop13

Bronze member
My district v2i deck has a little cut in the headtube where the headset sits , so the headset wobbles a bit (the deck is ~ 4 months old , and its fairly grinded) .
Should i buy a new deck or keep the District? I am scared that i ruin my headset : /
 
gjdadj

gjdadj

Steel Member
Choop13 said:
My district v2i deck has a little cut in the headtube where the headset sits , so the headset wobbles a bit (the deck is ~ 4 months old , and its fairly grinded) .
Should i buy a new deck or keep the District? I am scared that i ruin my headset : /
Click to expand...

districts are tough.... just tig weld a drip into the cut and then file/sand the blob until its flush... if you do it well you should be able to spray over the area and make it look as though nothing ever happened. if you dont have the stuff to do that i suggest you keep riding... district decks are tank. you shouldnt break it.
 
Foster

Foster

Steel Member
Reventon or addict?
I have a reventon 4.65 and love it, but, it feels a bit heavy to me (I'm 105 pounds) and im just wondering if addicts are a lot lighter or what deck would be lighter. I'm proboly just gonna stick with my reventon but I wanna know if I should maybe trade for an addict or somthing
 
nick silverman

nick silverman

Member
NinjaBaboonBoy said:
Reventon or addict?
I have a reventon 4.65 and love it, but, it feels a bit heavy to me (I'm 105 pounds) and im just wondering if addicts are a lot lighter or what deck would be lighter. I'm proboly just gonna stick with my reventon but I wanna know if I should maybe trade for an addict or somthing
Click to expand...

if you want a strong light deck ether get a v2i or an aos v2 iv had both (running the aos right now) and there both great deck and my friend has an addict and it doesn't feel to good to ride
 
Piccadilly

Piccadilly

Member
I brought some invertscooter bars but the inner diameter was too small for my mgp forks. So we emailed them back about it and they said my forks were too long and that i should cut them to about 45-50mm. I measured this on the bars and it would seem that they would fit (if i cut the forks) but would only fit by stretching the slit and wouldn't go further than that. I don't really want to cut my forks, and this doesn't seem very safe as all the pressure would be on the slit.
Any ideas on this, sorry if its hard to understand was hard to explain.

Thanks.

Oh and my forks/deck are mgp pro 2011.
 
TomGeorge

TomGeorge

Steel Member
Piccadilly said:
I brought some invertscooter bars but the inner diameter was too small for my mgp forks. So we emailed them back about it and they said my forks were too long and that i should cut them to about 45-50mm. I measured this on the bars and it would seem that they would fit (if i cut the forks) but would only fit by stretching the slit and wouldn't go further than that. I don't really want to cut my forks, and this doesn't seem very safe as all the pressure would be on the slit.
Any ideas on this, sorry if its hard to understand was hard to explain.

Thanks.

Oh and my forks/deck are mgp pro 2011.
Click to expand...

Invert are unlegit - go for some others.
 
TomGeorge

TomGeorge

Steel Member
You're in the UK right? So I would go for 81 t bars, or something. You're not going to get much for under £30 though.
 
7

702_dialed_rider

Silver Member
Hey what size bar should I ride I currently ride 22 h by 19 w bars but I am 5,11 almost 6 foot are these good for me or to small because I notice I almost died going down a big roll in because my f don't lifted up. And I always go down this or an it be because I got a new scoot I used to ride a fusion elite but now MADD gear gave me a new vx2 teAm edition for free so I dont know
 
7

702_dialed_rider

Silver Member
Piccadilly said:
Lol, could you tell me of some?? I need some 22.5" high and at least 20" wide for under 30£.
Click to expand...

Find a mate to make you some just go to home depot or what ever you have and by the metal tubes for you're bars asksome one on hear what id and od you need for down tube and the cross bar and have a mate weld them for you and there you go I don't no how mutch 30 £ is in American money so I am not sure how mutch that is but it should be enogh
 
You must log in or register to reply here.
Top