thinking about getting a new scoot,think i should make changes to this setup?

EthannW

EthannW

Member
ok,well im thinking about getting a nice,light scooter and when i thought of light district came into my mind.most of these parts are district cus apparently these new parts are stronger than the previous ones .i have a budget of £300 and this fits in it perfectly :cool:
Light Blue ODI Longnecks : £9.95
District AL-2 V3 Curve Bars , white/blue : £59.95
Lucky Oversized Double clamp: £19.95 (im not running HIC,but it says that the bars need an oversized clamp so yeah :p) but im gonna raw it and spray it white cus i cant find a white/blue one :p
District Integrated headset: £24.95
District FK-1 V2 threadless forks: £44.95
District DK-2 Integrated: £99.95
District ICS : £9.95 (probably will change to SCS at christmas,just dont have the money and i dont know if the bars would work)
Blazer Pro Metalcore wheels (silver) : £23.95
And some Bones Swiss bearings i already have :p
and thats just above £290 , so perfectly fits ;D
so yeah, rate outta 10 , tell me what i should change and if any of the parts suck :p
 
brody01134

brody01134

Steel Member
go for a cheaper clamp and see if you can get a better fork but thats my only suggestion that would be a super light setup
 
EthannW

EthannW

Member
damn,you guys reply fast! ;D yeah @Ashley i said im gonna get an SCS for christmas so yeahh :p
and @ both of you , what fork do you reccomend? remember im from the UK so i cant get scorchers and stuff,just stuff i can get from skatehut and dogg.my budget is like,£60 for one so im thinking blunt SOB threadless and ill just raw it :p oh and i would get better wheels but im just gonna get blunt metalcores for christmas anyways :p
 
EthannW

EthannW

Member
Im in derbyshire/yorkshire , but im often at UKSKATE in stockport :p think i might get the SMX . but do you know if it has offset or not? and its funny you suggested VertX cus i was just on their facebook page o_O
 
R-Dubya

R-Dubya

Steel Member
Get some VertX stuff if you can sacrifice a tiny bit of weight for a much stronger setup that will probably even cost a bit less. Replace the forks, clamp, and wheels with VertX products and you, my friend, have one nifty setup.
 
Connzi machell

Connzi machell

Member
R-Dubya said:
Get some VertX stuff if you can sacrifice a tiny bit of weight for a much stronger setup that will probably even cost a bit less. Replace the forks, clamp, and wheels with VertX products and you, my friend, have one nifty setup.
Click to expand...

This. But I don't think you need to replace the forks as the new disrict ones look f'n sick. Also somewhere in it you said that you'll probably switch so SCS in chrismas but you aren't sure whether the district AL bars will fit. So to answer that, if its a Proto Full SCS then it will fit as long as you take the shim out.
 
You must log in or register to reply here.
Top