threadless pro model fork

[Ryan Murray]

i have a brand new threadless pro model fork...it has beeen used for less than a week and it is not bent at all...i got it professionally welded by a guy who makes boat trailers...he also added a welding reinforcement in there too...i will reinforce it if u want me to..i will also re paint it flat black, light blue, seal brown, red, ivory, or textured black

welding reinforcement from the top of the fork

welding reinforcement from the bottom of teh fork

welds of the fork

close up of the welds

the legs of the fork from a side veiw

the legs of the fork from a front veiw

 

[rayan17]

wouldnt it come hella loose all the time?
and i doubt you could put a compressions system on it.
but idk so i cant judge
fill me in

 

[Madis]

Dude, that forktube isn't straight.

 

[qwxor]

lawlz0rz you cheat!

 

[!Iscoot369]

yeah it is not bent...when the guy welded it the clamp bent it the slighttest...it is not even bent it is just a liitlle off center...and the welds are fatter thn the fork so it just looks like it is bent...and the welding reinforcement is welded...i rode it is is perfect...nothing wrong at all

and yes it does fit a compression system you just have to use the top cap of an FSA headset

 

[!Iscoot369]

this is ryan murray on michaels account so ya

 

[Mike Hunt]

How much do you want for it?

 

[Ryan Murray]

bump