What do I do? Please Answer

[Cheezel]

Ok so I was trying to replace these old crappy bearings in my metalcore so I searched up a thread to get bearings out. I did what it said and got an allen key and hit it with a hammer but the bearing didnt come out, it collapsed. So I thought well thats ok there shitty bearings any way. So I did the same thing to the other bearing. What I didnt notice that the outer casing of the bearing was still stuck in the wheel. Is there anything I can do or am I screwed?
Pics-

 

[Devin Parker]

ha! same happened to me your going to need to buy a punch kit and a hammer

EDIT: btw what kind of wheels?

 

[Cheezel]

ha! same happened to me your going to need to buy a punch kit and a hammer

EDIT: btw what kind of wheels?

i think there derailed were pretty good for me but there is always the critic

 

[Noah Scoots]

flat head and hammer

 

[-Mark Kuhna]

I would try getting a hammer and putting it into the center at an angle and just hitting it hard while you're standing on the wheel or its in a vice. I've never had this problem so i'm not sure but my suggestion might work..peace

 

[Jacobo]

happened to me
u need to get a flathead scredriver and hit with a hammer (u need to eveanly hit all around so it doesnt get jammed)

 

[Kieran Mayhew]

Just count yourself lucky you don't have Eagles, because trust me, if this happens to Eagles you are pretty much screwed. I had to put mine in the oven for half an hour so that the metal expanded, then I had to spray WD-40, and even then they took 10 minutes to get out EACH.

 

[Devin Parker]

lol wouldnt that completely kill the urethane??????????

 

[undialeddavid]

happened to me
u need to get a flathead scredriver and hit with a hammer (u need to eveanly hit all around so it doesnt get jammed)

exactly wat this guy said, its happend to me

 

[Kieran Sherstobitoff]

Yeah the same thing happen to me as well, I just found a pipe that fit the bearing part perfectly and took a hammer to it and came out easily.

 

[Drew Martinez]

I put my wheel on to a big socket and got a flathead and hammer and hit it out

 

[yoyoflavored]

orrr u could find sum1 who is accurate with a saw, and saw it in two

never heard it before, i dunno if it works

 

[Devin Parker]

exactly wat this guy said, its happend to me

how!? your wheels are completely ovalized! lol

 

[ConnorD]

If you're good enough with a saw, try cutting a slit in it and getting it out

 

[Can]

do you have spacers?

 

[Zach!]

happened to my dont use a screw driver it takes forever trust me i tried to do it that way get a wrench socket that fits it perfectly and hit it out

 

[Patscooters]

this literally happens to me everytime I take bearings out

 

[IScoot:)]

flat head screwdriver and hammer. easy as taking headset cups out

 

[Cheezel]

do you have spacers?

yes but they fell out when the bearing fell apart

 

[Kroto]

Just count yourself lucky you don't have Eagles, because trust me, if this happens to Eagles you are pretty much screwed. I had to put mine in the oven for half an hour so that the metal expanded, then I had to spray WD-40, and even then they took 10 minutes to get out EACH.

that happened to mine, but it didnt fuck it, he got like some fine tipped chizzel looking thing and bing bang they were out.

But my dad has worked with these kinds of this for most of his life so..