What do you want in a deck?

[LewisArsenault]

The demensions I would like to have are:
* 21 Inches long
* 4.5 Inches wide
* 4130(not sure if that right or not) Chromoly(If that possible)
* The foldy to look like Fernando's Sprite foldy Except Wider with Triangle Reinforcements at the Bottom
* And One Piece

 

[Tanner!]

ok. im only gonna make a few different dimensions, like maybe ill have it so one size is 19 long 4 wide, 20 long 4.5 wide, 21 long 5 wide.

 

[JoshToy]

Please tell me that you know the first step to a one piece deck, is to make a jig. You can't just eyeball and weld pieces together, just won't work, nothing will come out alike.

Internal headset, 4.5 width, one inch shorter than Pro Model length, headtube rake to 82-83. T6 Alu. Perhaps a deck with slight concave shape? I always did like a little concave. Like the old AW decks had. Barely noticeable, but enough to make your feet stick a little more to the deck, and more responsive on tailwhips when kicking the deck into whip.

 

[Michael Rankin]

build it just like a tsi, but with a slightly less steep headtube angle, and i mean slightly less. gussets where the headtube meets the deck, and to have the top of the deck rails drilled out like andrew broussard's xt deck.

 

[James Shaheen]

ok i dout anyone is gona agree on angles width or length so y dont u try making each deck custom and have people fill out something and let them choose wat they want than custom make after the tell u wat they want

 

[chrisisafoo]

dude that would be the most insane thing ever

you would get so much busyniss from that

 

[JDBen]

that would probably cost alot of money

 

[Mario Rocchio]

Make it longerrrr than a promodel. It gives the rider a lot better feel. well at least for me...

 

[chrisisafoo]

i want it shorter than a pro model

custom decks for 150? expensive but awsome

 

[Tanner!]

ok i dout anyone is gona agree on angles width or length so y dont u try making each deck custom and have people fill out something and let them choose wat they want than custom make after the tell u wat they want

i think what ill do is have one size, and then you can order customs for a lil more money

 

[Tanner!]

bump

 

[kolbycrouch]

if you have the money, use 2024-t3 aluminium, its slightly lighter and quite stronger than 6061-t6, which is what tsi's and pro models use, make it 1-1 1/2 inch LONGER than a pro and about 4.5 wide with a very slight concave, and compatible with 125mm wheels

 

[Kenneth Irwin]

just like the tsi deck 4.5 in wide same length as a razor pro built in brake, and intergrated headtube.

 

[Tanner!]

i think ill make one deck that will sell for bout $100, then customs for bout $130 or so?

 

[Spicy McHaggis]

we want random bends/ zig zags in it, maybe some underglow, random rust and holes on it and in it, a bunch of random rattles in it,

 

[Matthew Madera]

lmfao, i want neon lights on the bottom so i can look like a mexican low rider : }

 

[Tanner!]

how bout you shut up and get back on topic =D

 

[blindscooterboy]

same width as a pro
same length as a pro
same angle as a pro, maybe like 80
tiny bit of concave would be sick
square headtube
intergrated headset
relatively the same weight but wayyyy stronger of course

 

[fsa]

some thing as tsi with a pro brake and deeck pins

 

[DMazz]

yoo. i want the same length and width as a pro iight. i want about an 82 degree angle or soo just a little steeper then pro models. i want a brake that i wont have to fix all the time bc of the wobble but i dont want a brake that will break. you figure out the brake ;]] the weight i want the same as a reinforced pro model

good stuff nawimsayinnnnn