wiggling.

[Sshields32]

I have tightened all the bolts on my scooter, the clamp, tightened my compression. and my bars are still wiggling. its really annoying. i dont know what else to do. help?

 

[beastlycaptain]

are the bars all the way on the fork? and is it just a normal Allen wretch clamp?

 

[Hep Greg]

your headset's fucked up.

 

[team_punishment]

well since you have buffs it is probly the bolts on the top clamp. it happenes to me sometimes. just tighten them and you should be fine

 

[Sshields32]

Nick: at the stem?
Hepptiy greg: it doesnt seem like anythings broken. im going to look at it tonight.

 

[ibbruiser]

i am riding buff bars and the crossbar wiggles. the stem is bent or warped on mine so no matter how tight. it still wiggles.

 

[Hopesta]

Wrap some tape around the middle section of crossbar?

 

[Mike Montgomery]

yeah, tighten the bolts on top of your stem. those have came loose on me before

 

[Chandler Hab]

mine does that too.

 

[Sshields32]

its my whole bars though. not just the cross bar. i can see the whole thing moving. but ive tightened everything. and it still is wiggling.

 

[Matt]

ya mine was doin that too just tighten the clamp as much as you can

 

[Sshields32]

i have, as much as i can make it turn.
it feels like the headtube is moving, but i dont think so. it doesnt look like its moving, and its never moved before.
I cant think of anything else.

 

[Mike Montgomery]

take apart your scooter and put it all back together. fork, foldy, bars, and everything. if it still shakes after then that then you have a seriouse problem.

 

[zprestoe]

Tighten the absloute Crap out of everybolt you can see.

If that doesnt work,
You will need a new Headset

 

[Hayydennn]

i have, as much as i can make it turn.
it feels like the headtube is moving, but i dont think so. it doesnt look like its moving, and its never moved before.
I cant think of anything else.

well for the crossbar put griptape where it is inside the ada stem and for the steertube take it off and put hotglue on the top off it and put it in, and also if the botls are faily old replace them. i had the same problem but this fixed it. hope i helped =]

 

[Sshields32]

i decided im going to completely disassemble my scooter tonight. and put it back together

 

[demo]

i do that weekly so my scoot is dialed as sh!t...

 

[Mike Montgomery]

I never really have to do that. my scooter usually stays dialed until i break some part.

 

[demo]

yeah i break something daily.. so that is why.. usually just wheels and brakes.. so yeah that is why cause brakes are hard too dial..:[

 

[Jake ODonnell]

take it all apart, put it back together


oh, and how do you break brakes?
hahaha