wobble help

[Fletch Buehler]

ok i have a little wobble its eaither headset or bars i think......bar clamp is as tight as goes i have brand new stock headset and its tight i even tightened it as tight as it goes were bars dont spin and still wobble help plz

 

[blindscooterboy]

did you bolt your foldy mech?

 

[Fletch Buehler]

yes and i have buff bars

 

[Rob.]

take the dustcover off your stock headset and tighten more

tighten buff bolts
tighten lock nut
...something

 

[Jamie N]

i thought u had quit??

 

[kyle199]

just tighten every bolt up man

 

[Fletch Buehler]

well i was quiting cause rollerblading but got bad grades so mom canceled order for blades so now i ride me backup scoot

 

[Fletch Buehler]

and im starting to like it again and my pap owns metal shop so he make me bars and fork

 

[Billie Rainbow]

you run both nuts on the headset?
if so that might be a problem
and as rob said take the dustcover off

 

[Fletch Buehler]

what is the dustcover

 

[Jamie N]

well i was quiting cause rollerblading but got bad grades so mom canceled order for blades so now i ride me backup scoot

hah that's what you get for being a blader
EDIT: and how come your parents buy you stuff are u like 8?

 

[Fletch Buehler]

13 and for my bday and im not a blader i was gona try it out but im having fun scooting again accept for rain lol

 

[Matt Rittler]

i do believe the dust cover is the cricle ring to keep "dust" out of the bearings

 

[Fletch Buehler]

ok guys i took dusk cover and lock bolt off tightened headset all the way and all bolts and still wobbles...i can tell its not from headset its something with bars like not cut even or sumtin

 

[ColinO]

i had wooble cause i used to use like an a2 fork which doesnt come up as high as the aftermarket forks in the bars so the woobled no matter how tight the clamp was

 

[Joe Riley]

its the buffs. the aluminum probably wore down to where there is a gap between the id of the bars and the od of the fork. try putting electrical tape inside the bars around the sides.

 

[Fletch Buehler]

my dad fixed it

 

[ozikowski]

lol

 

[demo]

its the buffs. the aluminum probably wore down to where there is a gap between the id of the bars and the od of the fork. try putting electrical tape inside the bars around the sides.

if that were true the bars would slip off the fork.