wobble bars.

T

Tony Ebbert

Member
i just got a pair of ultra pro bars and they keep comin lose.ive tried just about everything i could think and they still come lose..this is what ive tried...
1. double clamp
2. tighten clamps as much as they can
3. put a spacer between bars & headset
4. put a shitload of grease and re-pack bearings...

any advice for this problem?!?!?!?!?:confused:
 
J

jare88

Jerry
if you have the stock fork and headset, it is held down by a top cap that has a nut on it and a lock nut to hold the headset in place. make sure every thing is tightened to the point that it spins without any play
 
T

Tony Ebbert

Member
jare88 said:
if you have the stock fork and headset, it is held down by a top cap that has a nut on it and a lock nut to hold the headset in place. make sure every thing is tightened to the point that it spins without any play
Click to expand...

yes i did that and it still comes loose
does anyone else have this problem with ultra pro bars!?!?
 
Kevin Lo

Kevin Lo

Bronze member
Maybe your clamp is stripped like my friend. He got a new clamp got a brolic kid to tighten it. Never had a problem again.
 
Dean Bost

Dean Bost

Bronze member
check your fork threads make sure its all the way pressed up...or try different combonations like your old forks with new bars or new forks with old bars or just try triple clamping it
 
T

Tony Ebbert

Member
Dean Bost said:
check your fork threads make sure its all the way pressed up...or try different combonations like your old forks with new bars or new forks with old bars or just try triple clamping it
Click to expand...

ill try that but...for the triple clamp thing i had 2 double clamps and tightened it so much the bolts snapped inside the clamp=[
 
Blake

Blake

Steel Member
Maybe try a clamp shim? I have the same problem with my one piece but i dont want to go threadless.
 
You must log in or register to reply here.
Top