1 piece installation.

[zacharylangille]

I know this is going to make me sound like a noob, but how do you install 1 piece bars? Ive searched and couldnt find it.

 

[Wubblelvr]

You just unscrew the clamp that you have now, pull those bars off, and slip the new one piece bars over where the other ones where. Then just put the clamp back on.

 

[Devin Catron]

just slide the old ones off and put the clamp on the bottom of the bars and put on the fork tube(this may require a rubber mallet)

 

[JonnyJonDogg]

it depends what bars they are ^

 

[zacharylangille]

thanks guys!

 

[Josh Herman]

1.Take off clamp
2.Take off the bars
3.Take one piece bars and clamp
4.Put the clamp on the bars
5.Take the bars put them over the fork
6.Tighten the clamp

This should be common since!!!!
LOL

 

[JonnyJonDogg]

<3 noobs

 

[JDBen]

1.Take off clamp
2.Take off the bars
3.Take one piece bars and clamp
4.Put the clamp on the bars
5.Take the bars put them over the fork
6.Tighten the clamp

This should be common sense!!!!
LOL

 

[Devon Garcia]

1.Take off clamp
2.Take off the bars
3.Take one piece bars and clamp
4.Put the clamp on the bars
5.Take the bars put them over the fork
6.Tighten the clamp

This should be common sense!!!!
LOL

Do you ever post anything usfull?

or do you just post to get posts?

 

[D= its sam!!]

1.Take off clamp
2.Take off the bars
3.Take one piece bars and clamp
4.Put the clamp on the bars
5.Take the bars put them over the fork
6.Tighten the clamp

This should be common sense!!!!
LOL

Do you ever post anything usfull?

or do you just post to get posts?

wellcome to sr.

 

[Basil]

like a normal standart bar

 

[Thomas Kananen]

unscrew the bolts on your clamp
lift up and twist to get stock bars off
place clamp on new bars
slide new bars on
tighten clamp
waalaaa