Am i missing somthing? D'=

B

Brandenberger120

Member
Alright My Threaded 110 sr forks came today so i took off my forks and put them off then i went to turn my bars and the forks got caught on the front of my folding mech the bolts... and i dont wana tell my mom they dont fit or else im pretty much screwed... so what am i missing....


PS: i use stock headsets and i dont have money for new headsets...
 
B

Big L

Steel Member
Brandenberger said:
Alright My Threaded 110 sr forks came today so i took off my forks and put them off then i went to turn my bars and the forks got caught on the front of my folding mech the bolts... and i dont wana tell my mom they dont fit or else im pretty much screwed... so what am i missing....


PS: i use stock headsets and i dont have money for new headsets...
Click to expand...

well for one its only one single "Fork" not plural, and you have to take that little thing in the front of your folding mec off, or you have a old a head tube, which all you have to do is get a pro head tube, hope that helps
 
M

me1

Member
Are you on an old A model? I'm pretty sure the fork tubes have to be filed down because they hit the neck. Pictures will always help though.
 
P

P4RK3R

Member
Jake ODonnell said:
make sure you have a crown race on your fork
Click to expand...


1. take a screwdriver and a hammer to tap the race out of your old fork
2. get rid of the madd/old a headtube and get a b or pro headtube.
 
B

Brandenberger120

Member
P4RK3R said:
Jake ODonnell said:
make sure you have a crown race on your fork
Click to expand...


1. take a screwdriver and a hammer to tap the race out of your old fork
2. get rid of the madd/old a headtube and get a b or pro headtube.
Click to expand...


Yeah i am going to do that later, but yeah i took off the little thing that holds the folding mech. so now it actully spins but still hits, so this is all i need to do then thanks =D
 
You must log in or register to reply here.
Top