Apex scs problems!

[Scoot4lyf!]

I have apex scs a sacrifice hyper headset and Phoenix phorx

I can't tighten the scs, which is brand new and I have head rock (the bars wobble backwards and forwards).
I have tried getting more leverage on the Allan key but it hasn't worked and I'm scared to round the compression bolt. Also my bars make a creaking noise sometimes when I'm landing tricks etc... All of these things make my scooter terribly Undialed, which I hate.

Any tips? Help would be much appreciated!

 

[Ethan_]

run spacers or cut your fork

 

[Hamish C]

If he has phoenix phorx you cant cut them, what deck do you have?

 

[Scoot4lyf!]

I have a fasen deck.

 

[Hamish C]

Is the fork tube like level with the middle of the scs?

 

[Scoot4lyf!]

What do you mean by this? The fork goes up to the 2nd bolt of the scs if that is what you mean.

 

[Scoot4lyf!]

Yes I think I get what you mean now, the top of the fork tube is touching the middle part of the scs.

 

[Hamish C]

Well you need spacers then, the fork tube has to be shorter than the lip in the middle of the scs for it to tighten, just stick some spacers on your forks then put the scs on top and once the fork tube is shorter than the lip in the middle of the scs you can put in your top cap and tighten it

 

[Scoot4lyf!]

Ok thanks for all your help!