Bars shaking alot problem.

G

gorrilaman

Member
Hello everyone,
there is a post which might be the same as this. I don't know as I don't really understand what is that guy saying in that thread and so I think I will just start my own which should be more understandable to me and some people.Here we go...

Yesterday, I just took off my T tube. Of course took it off the fork. Long ago, I was frustrated and hammered the threads of the fork. I ruined the threads and the nut to hold the headset in place nice and tight could not fit. I solved that problem by just forgetting about it and just shoving the T tube in.After that, my scooter was fine. I don't remember if I always had this but the bars were able to shake forward and backwards. Side ways too. Basically , 360 degrees shaking is possible.

The shaking was not too much. It was little and fine but yesterday when I fitted my T tube in, it shook really really loosely. I can see the " cover " for the top headset cup shaking too. I never had this problem when I did not have the nut there last time. Could the problem be just that I need a new fork with good threads and put a nut in? I thought it was some magic shit and my fork and T tube was not able to fit 100% perfectly so I put some masking tape and shoved the t tube in but it still shakes like earthquake.What should I do?

----------------------------

Another question which is quite a dumb question but last time and a few times already , I tried to take out the stock grips from my stock razor handle bar.You know that theres this metal thing below the stock grips right?Yeah I mean take that shit out. I pushed the buttons to release it but it won't come out. I twist and twist and it was still in there.Whats this problem?How do I solve it?

-----------------------------------

I edited this post but I forgot to ask this also. I ride a pro model anyway. I heard something like changing breaks around. Like my pro break changed to B model break and shit like that. Whats the use of changing breaks? So 110mm wheels fit? Stronger breaking? Looks? Oh and what model break should I change to if I wanted to.


Thanks guys!I hope this is not a " stupid " post lol.

John
 
G

gorrilaman

Member
Nope I did not take off the funny ring. Is it the one that when you ride stock headsets and you change to new ones, you hammer out that ring and put the new headset ring?
 
G

gorrilaman

Member
Yes i'm sure it would help alot but I don't know how to use a freaking camera and won't want to learn as even if I learned , i'm not allowed to use it lol.

I will just describe it to you. Fsa bottom cup with everything nice. Between fork and bottom cup are bearings, headset bearing seal and things ring.

Then the top cup is first top cup , bearings , bearing seal , some cover with the word FSA and another ring thing. The nut missing which I was talking about is just above that ring thing. Well , its supposed to be. Could it be because I don't have that nut which will tighten the headset to stop shaking like earthquake?
 
J

Jimmy23

Member
yeah thats probaly it because there is no way to hold the fork in place. Actually i'm positive that's probaly the answer, you might want to find anoher one
 
G

gorrilaman

Member
Oh yeah thats called the compression ring. I added it in the headset already. I mean added it and it was still shaking. I've never missed putting anything wrongly or not in. I believe that its the nut missing to tighten the headset.I will get my fork today and I will try out the nut.
 
You must log in or register to reply here.
Top