Bars wobble in scs

[Bror Svensson]

So i just got the district scs and i tighten the scs to the fork really tight so there is no wobble what so ever, but when i put my bar in the clamp (standard size bars) i tighten the 4 bolts as hard as i can. But when i stand on my scooter my bars can go back and forth and after a small sesh the bars nearly slipped out of the scs.
Please help i can ride like this!

 

[Hamish C]

Try cutting a tin can into a shim and put that around your bars before you put them in the SCS.

 

[parrish]

Does it have the shim in it..?

 

[Bror Svensson]

hamish ill give that a shot.

parrish yes i use a shim

 

[Frank T]

is your headset tight? cuz you cant feel that untill you get the leverage from the bars

 

[Bror Svensson]

yes its very very tight. i know noticed when i put some other bars in the clamp it does not wobble. Could it be something wrong with my bar?

 

[NJPeace]

Maybe try forktube in the bars if they have a slit? Other than that I really have no clue

 

[Bror Svensson]

i have fork tube in them

 

[Bror Svensson]

I solved it, i have an district scs and as you may know they have removable threads. So one of the threads wasn't put all the way in so when i tighten the clamp the threads just soun around so it did't get tight